2.0.51 runs on cards other than .54/.55; it's what we run here... Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville "Don't sweat the petty things, and don't pet the sweaty things." On Fri, 21 Jan 2000, Brian wrote:
is 2.0.51 really only for .54/.55? I mean reading the pdf, I see a fix for .54/.55 cards, but the rest of the issues looked like they applied to any DSP.
Brian
On Fri, 21 Jan 2000, Scot Desort wrote:
Paul,
Have you tried 2.0.51 on the DSP's? I know it was really only intended for .54/.55 rev cards, but there are some fixes for Rockwell in there. Might be worth a shot to load it on some cards and see if it makes any difference.
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Paul Farber Sent: Friday, January 21, 2000 3:28 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) To many drops after connect
Because the call up and complain. I know what you are saying.. it might be the software... but it's been happening far to often to to many people.
Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.