Hi there... On Wed, Nov 12, 2003 at 03:15:17PM -0400, ISN Support Staff wrote:
Hi Oliver,
Have you tried +MS=v90 on the client side? The +MS=v34 turns off all 56K features (which is why the modem only gets 3-3.5k/sec with that
yep... true..., but even with a V.92 capable-software and locking V.90 things do NOT get better *sigh* Even just checked out the US-Robotics magic ControlCenter with no better luck...
init) +MS=v90 should lock it at v90 and not try v92 (although I'm not 100% sure on that) which might work better. We have a lot of those Connexant modems here in Canada too (especially in Canada) and I've found that with the v90 drivers (haven't tried v92, since our TC's don't support it) they do work as well as any other software modem (4-4.5k/sec on binary downloads.) There might be a difference between the North American and European drivers though.
... mhm... might be. Some other hint: I configure DSPs mostly per "factory-default", as we are serving for MANY people here and normally this works. I got complains from this customer for especially this and ELSA-MikroLink stuff as well... might be related?! Thnx again, Oliver.
On Wed, 2003-11-12 at 14:46, Oliver Francke wrote:
Hi *,
On Wed, Nov 12, 2003 at 02:17:26PM -0400, ISN Support Staff wrote:
Hi Joel,
Bingo! I had to bring a new radius server online at the same time we switched to the HiPer system (the old one wasn't sending back the response packets to the HiPer) and I forgot to remove the MTU line from the users file. Doh! Thanks for the tip.
Uhm, despite this being solved... I'm experiencing slow connections and even drops with some "conexant" HXF-PCI-modems. I tried several combinations:
TCS-4.5 w/ and w/o V.92 switched on ( if it matters anyway) TCS-4.7 w/ and w/o V.92 switched on
each 1. orig US-Robotics 56k PCI flash installed ( <= V.90) and 2. conexant-generic driver published on their web-site ( <= V.92)
Over 95% of all tries ended in transfer-"speeds" at 500-600cps.
Sh...low, eh?!
The best transfer-rate was achieved with:
AT&F+MS=V34,1,75,28800,75,33600
which gave me a "V34plus" connection on the server-side. Rate ca. 3kB/s and stable.
Any ideas VERY welcome, as this kind of beast is distributed widely here in Germany :-\
And of course I do NOT want to change much if any on the server-side.
Thnx in @vance,
Oliver.
[...]
-- Oliver.Francke@telefonica.de fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking.