Also sprach Donald Baud
If you say that disabling the messaging support on the DSP will forbid me from using the localoutofservice command. How do you explain that we could busy out lines with the 2.0.x DSP code (keeping in mind that the messaging support feature was disabled by default on those codes)
Uhm...the release notes indicate that service messages are *en*abled by default on DSP code. Having never actually run 2.0.x code, I can't say for sure (most of my DSPs are still at 1.2.x :). If you're on a span that supports service messages (as you seem to indicate), then this issue really *shouldn't* be your problem, though it might be something related. This really only affects bringing the ds0's in service to begin with. If your span is dropping for some reason, and then not getting an ACK back on its inservice message, then you could get bitten by this issue, but then you also have to consider, "why is the span dropping to begin with?" and "why is it not getting an ACK back when it should?" as other issues that you can address to solve this issue. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.