Telnet to arc and write:

add ip defaultroute gateway <ip-address-of-gw-router> metric <metric>

Also your gateway router has to know about IP pool (this pool have to be routed to arc).

----- Original Message -----

From: Ray Bagby

To: usr-tc@mailman.xmission.com

Sent: Wednesday, September 17, 2003 11:45 PM

Subject: [USR-TC] changing IPs

Greetings,

    I have a Total Control Chassis with 2DSPs and HiPer Arc and NMC. I've just found out

I need to change the IP pool for the dial-in's.

    After I go to the HARM and change the pool it assigns the correct ip number to the caller

but they are not able to access any resources.

    I know I'm missing something, but I'm not sure what it is.

    I read on an earlier post about the gateway. Where is that setting located? Is it something

that can be accessed by HARM or should I use the TCM? Also, as long as the ARC, NMC and

radius server can talk to each other is there any reason to change thier IP's?

Thank you very much!

Ray

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc