I am using a netgear RT328 to dial into a Courier I modem and experience the same problem. I think the Netgear gear has a problem with not keeping NAT mappings or some such thing. I message to netgear tech got me a "reload the flash".. not to helpful. It's not your DSP's... its the Netgear. I have a 3Com OfficeConnect also that dials into the DSP's..... will run fine for days then the B's wont come up. Reboot the OfficeConnect (or simple DROP the B's manually and your back in business). Paul D. Farber II Farber Technology Ph. 570-628-5303 Fax 570-628-5545 farber@admin.f-tech.net On Mon, 16 Aug 1999, Ken Kirchner wrote:
On Mon, 16 Aug 1999, Tatai SV Krishnan wrote:
I have not seen this problem nor have heard from anyone - A few days ago I came to know about this - may be I missed this list or something. As far as ISDN goes - I used it - have a nailedup connection with our chassis here and have never seen the problem - I do use some of the same TA's mentioned in the problem.
When this happens to me I experience "router death". I cant go anywhere through any TCP port. No web, no mail, no telnet. I can run around fine on the lan of course, and telnet into the router, but thats it. Turning off the router is the only way to unlock it. Like I said before, I am still at the stage of determining if it's my router or it's the TC box. One would think that if it was the TC box, I could simply drop both channels and reconnect, problem corrected, but I dont believe this is the case. I will post my observations later this evening. I have re-software downloaded the router once already with no effect. Like I said, this was not an issue until our last upgrade to the TC box. I will try the MTU fix. There is no option I can find for header compression on the Netgear so I will have to disable it on the arc. When I refer to compression I am referring to STAC which I believe is packet data only. I could be wrong.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.