I'm not seeing 3.5.105 on source support site (3.5.100 is the latest listed there) ; is it not officially released yet? Thanks, Jeremy Malli Visionary Communications, Inc. jeremy@vcn.com -----Original Message----- From: Joel - Fox Computers [mailto:jfox@foxcomputers.com] Sent: Monday, September 23, 2002 12:35 PM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] 3.5.105 First - nope, 3.5.105 been stable here. Second - I know they don't recommend running conflicting versions of software. Your DSP and NMC are TCS4.5 but your ARC is pre-TCS4.0. I would get your ARC up to 5.3.3. Third - according to Source-T, there is no 3.5.107 - .105 is the latest. Hope that helps, Joel -----Original Message----- From: Terry Kennedy [mailto:terry@olypen.com] Sent: Monday, September 23, 2002 1:22 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] 3.5.105 Any one seen rebooting problems with the 3.5.105 code? We have been running it for a week. This morning I have watched card after card reboot for no apparent reason. Not good. Is this something 3.5.107 fixed? I am currnetly running hiperarc code 4.2.73 dsp code 3.5.105 nmc 8.6.3 Terry Kennedy OlyPen, Inc. _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc