Turn jumper 5 to on position. Boot NETServer Set a new password and configuration. Save settings. Turn jumper 5 to off position. Use your NETServer. Ahsan Shariful wrote:
Thanks everybody, specially Mr. Joel.
I could connect to the Console. The problem was with the cable configuration. :-) But now I'm in a new trouble. I don't know the password. user name is !root. But how to reset the password to the factory default ? Can anyone help ?
Thanks in advance.
Joel - Fox Computers <jfox@foxcomputers.com> wrote:
Sorry, not familiar with the Netserver's. Don't have any doc's on it for the jumpers either.
Check the software library at http://totalservice.commworks.com <http://totalservice.commworks.com/> for docs on that card.
Wish I could help more.
Thanks,
joel
-----Original Message----- From: Ahsan Shariful [mailto:ahsansimon@yahoo.com] Sent: Monday, February 24, 2003 11:58 PM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] can't connect to cosole for usr-tc 1000
Thanks for prompt reply.
The right most card is "Network Management Card" and the card beside it is "NETserver PRI Card". "NETserver PRI Card" has a port named "console". I was trying to connect to this port. Am i doing the right thing ?
Do u use yahoo or MSN messenger ? My ID is ahsansimon@yahoo.com <mailto:ahsansimon@yahoo.com> and ahsansimon@hotmail.com <mailto:ahsansimon@hotmail.com>. If u wish u can add me to ur contact list.
Thanks a lot.
Ahsan
Joel - Fox Computers <jfox@foxcomputers.com> wrote:
OK - I should have been more specific. What does it say on the front of the chassis on the card you are trying to connect to? ie. Hiper Access Router Card, Hiper NMC, Network Management Card, etc.
Thanks,
Joel
-----Original Message----- From: Ahsan Shariful [mailto:ahsansimon@yahoo.com] Sent: Monday, February 24, 2003 11:19 PM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] can't connect to cosole for usr-tc 1000
Thanks for your reply.
The device is USRobotics "Total Contorl Enterprise Network Hub"
Thats what written on the device. I don't have any manual.
I was told that it is a USR TotalControl-1000.
Thanks you
Ahsan
Joel - Fox Computers <jfox@foxcomputers.com> wrote:
I have no idea on the cable pinout. But I can help with the jumpers. What is the device?
-----Original Message----- From: Ahsan Shariful [mailto:ahsansimon@yahoo.com] Sent: Monday, February 24, 2003 5:33 AM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] can't connect to cosole for usr-tc 1000
Thanks for your reply. I'm novice in this field and I might have some mistakes. I would request you to verify what I've done.
1. I'm using a DB9 with RJ45 interface. So I've made a RJ45 to RJ45 cable. The connecting is as follows:
1-------------6 2-------------4 3-------------1 4-------------5 5-------------3 6-------------2 7-------------7 8-------------8
So the connection is "Console port of usr-tc":RJ45---RJ45:DB9 :"COM port of windows pc"
And I have no idea about the jumper settings as this device is not a brand new one and I don't have any manual or accessories. I got a manual from the web.
Thanks you. Waiting for your reply :-)
Ahsan Simon
Joel - Fox Computers <jfox@foxcomputers.com> wrote:
The default for the hardware is usually 9600bps, 8-n-1. If that doesn't work, you can check jumpers on the card you are trying to connect to, but most-likely the cable made is not correct.
-----Original Message----- From: Ahsan Shariful [mailto:ahsansimon@yahoo.com] Sent: Monday, February 24, 2003 2:42 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] can't connect to cosole for usr-tc 1000
Hi,
I need to setup a usr-tc. Hyperterminal can't connect to usr-tc 1000. I'm using a custom cable RJ45 - DB9 ( i got the pinout from this mailing list). I tried with all bits/second (110 to 115200) and other setting as "8-None-1-Hardware". I can't figure out the problem. I don't have the null moded cables or any other cable provied with this hardware.
Somebody please help :-)
Ahsan
------------------------------------------------------------------------ Do you Yahoo!? Yahoo! Tax Center <http://rd.yahoo.com/finance/mailtagline/*http://taxes.yahoo.com/> - forms, calculators, tips, and more
------------------------------------------------------------------------ Do you Yahoo!? Yahoo! Tax Center <http://rd.yahoo.com/finance/mailtagline/*http://taxes.yahoo.com/> - forms, calculators, tips, and more
------------------------------------------------------------------------ Do you Yahoo!? Yahoo! Tax Center <http://rd.yahoo.com/finance/mailtagline/*http://taxes.yahoo.com/> - forms, calculators, tips, and more
------------------------------------------------------------------------ Do you Yahoo!? Yahoo! Tax Center <http://rd.yahoo.com/finance/mailtagline/*http://taxes.yahoo.com/> - forms, calculators, tips, and more
------------------------------------------------------------------------ Do you Yahoo!? Yahoo! Tax Center <http://rd.yahoo.com/finance/mailtagline/*http://taxes.yahoo.com/> - forms, calculators, tips, and more