Hi Rick, I have the same problem. Using this command does NOT change the radius port from the default of 1645 to 1812. Isn't this dependant upon the software version on the Total Control unit, i.e., older software just will not support radius port 1812?? Thanks, Lisa Casey, Webmaster Netlink 2000, Inc. lisa@jellico.net ----- Original Message ----- From: <RickL@solunet.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, August 28, 2002 1:04 PM Subject: RE: [USR-TC] Radius Port
set authentic xxx.xxx.xxx.xxx <port> [secret password]
Rick Louizos Solunet Soluserve TAC Manager 1571 Robert J. Conlan Blvd. suite 110 Palm Bay, Fl. 32905 Phone Numbers: Phone: (888)449-5766 / Fax: (321)676-1287 Internet Addresses: mailto:RickL@solunet.com / http://www.solunet.com
-----Original Message----- From: Scott Bailey [mailto:scott@epix.net] Sent: Wednesday, August 28, 2002 12:55 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Radius Port
How do you change the default radius authentication port from 1645 on a Netserver. I tried
set authentic <ip> <secret> <port>
Show global still says 1645.
Thanks
---- Scott Bailey Systems Engineering Epix Internet Services scott@epix.net
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc