Thus spake Lon R. Stockton, Jr.
On Sat, 22 Jan 2000, Mike Andrews wrote:
To really get to the bottom of the disconnect stuff, you have to look at BOTH disconnect reasons -- one logged by the ARC, one logged by the modems.
Good list Mike...thanks!
Is there a way to get the hub to send both reasons to the radius accounting server as part of the acct-stop message?
No...basically because the Arc is sending the acct-stop message, and it only has the Arc disconnect reason...the modem disconnect reason is only accesible via a modem event. The modem will send the event to the NMC, and the NMC can generate either one or both of an SNMP trap, or a RADIUS accounting request. Note, this is a *seperate* RADIUS accounting request from the Arc's. It is configured on the NMC, and is configured as "enablelog" rather than "enabletrap". You'll also need to set up the log server on the NMC. You can send these RADIUS accounting logs to your main RADIUS server, but I tend to send them to a seperate one to keep the information seperate, and easier to handle (if you enable logs on your modems for even a small number of events you're going to have some rather large log files) -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.