disable ospf delete ospf default_area set ospf default_area_id 0.0.1.7 (you will need to change this to the correct area) set ospf global asbr enable set ip network ip routing_protocols ospf add ospf sendpolicy 207.89.245.0/25 source local action advertise add ospf sendpolicy 207.89.245.0/25 source remote action advertise (the above IPs are for the ip pools...you will need a source local and source remote for each ip pool you have...the network address's of them) set ospf global traps disable enable ospf set ospf interface <ip of box> router_priority 0 save all Todd ----- Original Message ----- From: <pferraro@wna-linknet.com> To: <usr-tc@mailman.xmission.com> Sent: Monday, February 03, 2003 3:42 PM Subject: [USR-TC] OSPF on HiperArcs
I know that this has been out and about on numerous occasions.. But I
need
to know where I can find the information for setting up OSPF on my hiperarcs in conjuntion with my Cisco 3640. If anyone can tell me how to configure the HiperArcs or can point me to the usr-tc archive for the answer I would truly appreciate it!
Currently I have 3 total control hubs that have STATIC routes in my Cisco.
Phillip
------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access -------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc