I have this happen occassionally and simply pull the card out of the chassis and re-insert it... Comes right back to life! ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro@wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite Q FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== On Fri, 8 Jun 2001, Kirk Mitchell wrote:
My NMC recently stopped responding to SNMP queries, etc and I'm unable to access it via TCM. It has, however, not seemed to affect anything as far as dial-up, routing, etc. Other than the fact that I can't run MRTG against it or the badmodems.pl script, there's no indication that it's having problems. Has the card gone bad...need replaced, lost something in part of config? How do I go about finding/fixing the problem?
NMC is hardware 6.0 running 6.1.17
Thanks,
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.