I do not have access to a netserver however here is how it works set authentic <ip address> <secret> <port> I am not sure if its authentic or radius so check that but the command is to set the radius followed by secret and then the port and then the version if you use different radius versions (note - radius version has nothing to do with the actual version number of your radius server - so either ignore it or use version 1 always) -V ----- Original Message ----- From: "Meng Tsai" <tsaim@mailhost.mft.com> To: <usr-tc@mailman.xmission.com> Sent: Saturday, April 20, 2002 3:15 PM Subject: [USR-TC] Repost- How to change TCH AAA port num
(Appologizing for the previous post with wrong coding )
--- Our TCH Netserver software version -----------
command> version U.S. Robotics Total Control (tm) NETServer Card V.34/ISDN with Frame Relay V3.6.28 Build date: Oct 2 1997 Build time: 14:42:06
Network Interface Card: Ethernet & Frame Relay Combination (26) ISDN Interface Card : MUNICH32 (4) Packet Bus Circuit : Standard
------------------
Please advise the command syntax on how to change
Q1: the Radius AUTHENTICATION PORT form default 1645 to 1812
Q2: the Radius ACCOUNTING PORT form default 1646 to 1813 -- tsaim@mft.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc