Todd: Thanks for your response. Here is the information you asked for: (1) Yes, these are regular PRI (23b + 1D) (2) NMC Chassis awareness is set to "YES" (3) Other settings: HiPer ARC on Slot 15: HiPer>> show nmc settINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassIS Slot Owner Description Ports Type Console 1 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 2 NO 24 Channel High Density Modem 23 DYNAMIC YES 3 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 4 NO 24 Channel High Density Modem 23 DYNAMIC YES 5 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 6 NO 24 Channel High Density Modem 23 DYNAMIC YES 7 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 8 NO 24 Channel High Density Modem 23 DYNAMIC YES 9 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 10 NO 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO HiPer ARC on Slot 16: HiPer>> show nmc seTTINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassis Slot Owner Description Ports Type Console 1 NO 24 Channel High Density Modem 23 DYNAMIC YES 2 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 3 NO 24 Channel High Density Modem 23 DYNAMIC YES 4 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 5 NO 24 Channel High Density Modem 23 DYNAMIC YES 6 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 7 NO 24 Channel High Density Modem 23 DYNAMIC YES 8 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 9 NO 24 Channel High Density Modem 23 DYNAMIC YES 10 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO -------------------- One more thing; I looked into NMC (Manager) and looked NFAS Settings under "Hiper DSP Span Line Programmed Settings": NFAS Span D- Channel Type: dChannelPrimary Local Group Type: nfas If the above two settings makes any difference, please let me know. Thank you again. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Thursday, February 24, 2005 3:22 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Error using 2-HiPer DSP Cards Are these regular PRI (23B +1D) that you are terminating or are they part of a NFAS group? Also....what does your chassis awareness settings look like? The way you're trying to setup the chassis is typically how I setup most/all of our chassis. I disable nmc chassis awareness and specifically assign the chassis slots which it sounds like you did. Can you post the out put of the following of BOTH of your arcs: show nmc settings list chassis Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa@tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc@mailman.xmission.com> Sent: Thursday, February 24, 2005 2:42 PM Subject: [USR-TC] Error using 2-HiPer DSP Cards
Hello:
First thanks to all users. With your help, I am getting 3COM almost working. Now the next problem:
1 - HiPer NMC 2 - HiPer ARC 10 - HiPer DSP 2 - T1 ISDN PRI 23B + 1D Channels
HiPer ARC 1 (Slot 15) controls odd numbered (1,3,5,..) HiPer DSP Slots. HiPer ARC 1 (Slot 15) controls even numbered (2,4,6,..) HiPer DSP Slots.
I am testing HiPer DSP located in Slot 1 & Slot 2. First I connected the T1 Line into HiPer DSP on Slot 1. It worked fine. Then I moved the T1 to HiPer DSP in Slot 2 (no T1 in Slot 1). HiPer DSP in Slot 2 also worked fine.
Then I connected one T1 in HiPer DSP in Slot 1 and another T1 into HiPer DSP in Slot 2.
Now the error: The front panel light 'LPBK/D-ALM' on each HiPer DSP turns GREEN & then RED. Also, when the 'LPBK/D-ALM' light on HiPer DSP in Slot 1 is GREEN, the same light on HiPer DSP in Slot 2 is RED & vice versa. New Users can not connect & the one who are connected are disconnected.
What is the problem and how to fix it?
Kirti
PS: If my explanation is confusing, please let me know. I will try to clarify it.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc