TCS 3.6?? arc: 4.2.32 dsp: 2.0.60 Hiper NMC: 6.2.17 Todd -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Marshall Morgan Sent: Sunday, June 23, 2002 5:09 AM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] Hiper Arc reboots caused by DSP? code versions??? Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Todd Bertolozzi" <berto@voyager.net> To: <usr-tc@mailman.xmission.com> Sent: Friday, June 21, 2002 8:44 AM Subject: [USR-TC] Hiper Arc reboots caused by DSP?
Hello everyone,
Curious if anyone has seen or is familar with this problem:
It appears that by inserting specific DSP's into a chassis (DSP's that we believe are messed up at this point) it causes 1 of our hiperarcs to
reboot.
It goes into a crash dump sequence. This chassis is doubled up but only 1 of the arc's reboots. If we replace the DSP's the arc comes up and works fine.
This tidbit was of course figured out after replacing arc and chassis.
Anyone see anything like this before and have any other points of interest?
Todd
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc