Jamie: I am new to 3Com TC and went through the same. Read the documentation "Total Control 1000 Enhanced Data system". It has all the information you need. We did flash HiPer NMC and used Total Control Manager to up date the software for HiPer NMC, HiPer ARC & then HiPer DSP. Kirti -----Original Message----- From: jamie [mailto:jamie@skypoint.com] Sent: Tuesday, September 30, 2003 1:38 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Reflashing the whole Total Control rack Our boss plopped a Total Control rack on our bench and wants us to flash it up to the most recent firmware available. Its got Hyper NMC, Hyper Arc, and Hyper DSP's. I was told by another technician that the NMC card should get flashed first, then the Arc, then the DSP's, otherwise I could seriously break something. Going through the documentation at ustar.com, I can't seem to find anything which states what the proper flash order is. Can anyone confirm the order I listed is correct? Thanks, - Jamie _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc