If you are able to do double authentication look this options in arc: set switched interface slot:x/mod:y DNIS_AUTH_TIME [ AFTER_CONNECT BEFORE_ANSWER ] DNIS_AUTH_TYPE [ ANI DNIS ] DNIS_AUTHENTICATION [ DISABLED PREFERRED REQUIRED ] There is one more : USE_DNIS_AUTH_POOL but I can't find documentation on this. Another way (not very good, but works ok): you can reject calls when they connect to arc by radius. Mauricio Valenzuela Puelma wrote:
Hello !
How can filter the access in the Total Control equipment with ANI of the clients ???
Thanks.
----------------------------------------------- Mauricio Valenzuela Puelma Ingeniero de Proyectos Internet VTR Ingeniería S.A ----------------------------------------------- 56-02-3101000 / 56-02-3101693 Reyes Lavalle 3340 Piso 4 Las Condes / Santiago / Chile www.vtr.net <http://www.vtr.net/> - www.aldea.cl <http://www.aldea.cl/> -----------------------------------------------
------------------------------------------------------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc