Ever since I upgraded my HiPer ARC, snmp didn't work, so I started poking around... The last release I had seemed to have it on by default, whereas this one (4.2.32-1) seems to not; although it did allow me to script my additions of communities and whatnot without any complaints. So I did a "add netWORK seRVICE snmp serVER_TYPE snmpd enABLED yes". But was still unable to get any data. Looked at it, and it showed this status: HiPer-1>> list network SERVICES CONFIGURED NETWORK SERVICES Server Admin Name Type Socket Close Status snmp SNMPD 161 FALSE DISABLED tftpd TFTPD 69 FALSE ENABLED telnetd TELNETD FALSE ENABLED Issued "enabLE netWORK serVICE snmp", and it still says "disabled". What am I missing here? The manual makes no mention of doing anything beyond adding the service and even states it should be enabled by default when added... Any clues? Thanks, Charles -- =-----------------= = | Charles Sprickman Internet Channel | | INCH System Administration Team (212)243-5200 | | spork@inch.com access@inch.com | = =----------------= - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.