it should not be doing this if the telco's switch was paying attention to your out-of-service messages. You need to get the switch tech and possibly someone from translations to verify that your translation supports service messages. Matthew Stainforth || Technical Services Manager || BrunNet Inc.
-----Original Message----- From: Paul Farber [mailto:farber@admin.f-tech.net] Sent: Friday, February 04, 2000 1:26 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) Hard Soft busy out commands
Hello all
Trying to test individual channels on a new PRI.
Whenever I selected a group of modems and either hard or soft busied them out (to test the hunt group), I would get busy, and not sequence through the huntgroup to the next open modem.
All channels are up, am I not using the busy out commands correctly or will the hard/soft busy out 'break' a huntgroup?
Thanks!
Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.