I have re-flashed them, the thing is this is happening to every Quad ANALOG card I have 12 of them but its only on the Quad Analog's not Quad Digitals or Quad Analog/Digitals? Aaron eric@dol.net wrote:
Try reflashing the cards through tcm. That has helped me with some modems that seem to flake out. It could be that the card has gone bad and needs to be replaced. eric
At 12:12 PM 4/30/01 +1000, you wrote:
Hi, I am having problems with some Quad Analog modem cards that I have installed, I cannot get them to stay active I do set modem s49 active and it all appears to work, then I save and reset then I get whats below. the modems report A/I/P then after a reset they go A/A/P but I cant get them A/R/P.
Basically the modem is not active because it cannot successfully negociate with the packet bus(I think). after a reset my syslog reports: Apr 28 14:05:19 dialup9.dataheart.net S49 packet bus handle opened. Handle = 26.
After this the netserver reports the modem as active all though there is still no HDLC Framing and the interface is still set to Unassigned instead of ptp49 as it usually is. then 30 seconds later: Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus failed to connect! stat=-1 Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus handle closed.
now the netserver reports it as inactive again.
I have Quad Digital/Analog cards working fine in the same chassis but these Quad Analogs are just not co-operating.
any help would be appreciated, the 3com knowledgebase has not helped me. Thanks, Aaron Daniels
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-- Thanks, Aaron Daniels Network Administrator Dataheart - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.