I'm going to try dropping the attributes and see what happens. Not thrilled about it, but let's see if that fixes it... -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of dciresi@defunct.ae.usr.com Sent: Friday, October 15, 1999 12:54 PM To: 3COM List Subject: Re: (usr-tc) Radius Effects... Scot, Sounds like the Bay (or the Bay technician) is broken. However, the workaround you've sugested, should work fine. Simply define the default user's IP address and routing protocol (=none) on the ARC. This template will be applied to the user in place of attributes not actually sent. There is a way to prescribe different attributes for different NAS-Types, but it may require some RADIUS hacking. And most likely, this will require changes on the proxy server, as well. The best bet would be to correct the Bay NAS. Dominic On Wed, 13 Oct 1999, Scot Desort wrote:
While we're all talking about Radius, we currently send the following attributes to our TC for our default user:
Framed-IPAddress = 255.255.255.254 Framed-Routing = None
We recently signed up with Ziplink for wholesale nationwide dialup. A lot of their equipment is Bay. They claim that when the Bay receives these attributes, it chokes. It allows the connection, and the modem connect speed is fine, but throughput is horrible. Over 50% of the packets drop, and after a few minutes, the call will drop. They say we need to remove these attributes from the Radius profile we send. Huh? Bay doesn't like these 2 *basic* attributes? They also said they don't like 'Port-limit=1', but I am NOT removing that one. For this one, they state that they have trouble with the Bay doing 128K ISDN anyway, so removing the attribute will have no effect. Double "huh?"
My question is, what effect will this have on our local dialup customers connecting to our TC? Will the TC happily work without receiving those 2 attributes? We are currently not running RIP on the TC (we are small, so everything is static) - but we plan on enabling RIPv2 shortly. Will the TC start sending RIP updates to the dialup clients without the Framed-Routing=none attribute set?
They also have some Max's out there, but a good portion of it's Bay. I don't know of any way to have my Radius server send a different profile to their proxy, so it has to be the same one I send to my TC.
Sorry for what might seem a stupid question - not real up to speed on RIP and exactly what the framed-routing attribute does.
-Scot NJAccess
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.