|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't trust our |new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. | What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS.. -M - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.