I don't have the old manuals, but I do remember an entire section dedicated to connecting one TC hub to another via dialup connections, just like the current manuals have. It is possible, the problem will be getting the correct information to do so. If you have a current 3Com contract you could search the archives. The last time I did they had manuals online going back to the dark ages. Jeff is probably the most knowledgable person on this list to have on your side, and his willingness to break out an antique and fire it up should be considered a great act of kindness. I know I have an old netserver on the shelf somewhere, but no code for it, and no manuals. Mark Thornton San Marcos Internet, Inc 512-393-5300 ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@lists.xmission.com>; <ras@totalservice.3com.com> Sent: Thursday, September 13, 2001 11:34 AM Subject: Re: (usr-tc) EMERGENCY - Help with Netserver LAN-LAN
On Thu, 13 Sep 2001, Jeff Mcadams wrote:
Also sprach Charles Sprickman
-can I point default to a dialed-in session on the arc, and how
Yes, I *believe* you do this with the command: set network user <username> ip default_route_option enable
Can anyone else confirm this?
Thanks,
Charles
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.