Mike, Does the netserve.dmf file go in the ROOT dir of the server? How will it know where to find the file? ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro@wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite Q FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== On Sat, 3 Jun 2000, Mike Andrews wrote:
64 meg works fine here.
As far as getting the code onto a 4 meg flash... you don't *have* to use the "interim release" approach. The documentation describes a few others. The one I used was...
- put the .dmf file on a TFTP server with the name 'netserve.dmf' - connect a terminal to the console port of the ARC - reboot it - as it reboots, a menu will come up. Quickly feed it its own IP/netmask and the IP of your TFTP server
and it will TFTP the file down and update it right away. Pretty fast, doesn't need two reboots. I'd practice on a non-production card if you can first, to get the procedure down though. :)
Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville www.fark.com: If it's not news, it's Fark. (Or something like that.)
On Sat, 3 Jun 2000 pferraro@wna-linknet.com wrote:
With all the talk of the new code, has anyone put the code on a HiperArc with just 64 of memory? I have 4 HiperArcs Two with 128 and two with 64. Three of the 4 are in production (live). Can the memory from the 4th one be used to up grade the other HiperArc?
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.