I´m interested in your perl script, could you post it? ----- Original Message ----- From: "Adam Olson" <adamo@humboldt1.com> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Thursday, May 27, 2004 2:28 PM Subject: Re: [USR-TC] simultaneous use - 1 chassis, two ARC's
hey....i implemented a perl script for this problem to watch multiple boxes and to kick off duplicate logins....let me know if you would be interested in this solution. adam
Adam Olson Humboldt Internet
On Thu, 27 May 2004, Lewis Bergman wrote:
On Thursday 27 May 2004 11:18 am, Brent Crier wrote:
I'm not sure about ICRadius but with Radiator we needed to set the Port-Limit to 2 the default is 1. This maybe your issue. Here is an example: joeuser NAS-Port-Type = Async,Simultaneous-Use=2 Service-Type = Framed-User, Port-Limit = 2, Idle-Timeout = 0, Session-Timeout = 0, Framed-Protocol = PPP, Framed-IP-Address = 206.xxx.xxx.xxx, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP
Hope that helps. The problem isn't that it *won't* let them on. The problem is that is
*does*
let him on. I only want him to have the ability to log in once. -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 301 800-299-6962
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc