Hello all, this is my first post to the group so if I'm skipping any procedural steps or conventions, I apologize. My boss has asked me to look at some usr-tc gear that we know does not work and try to fix it or determine if it is really dead. Unfortunately I was thrown into the project and my background in usr-tc is a limiting factor. I was hoping people could look at the area code below and give any pointers as to where I should start looking. I'm currently working with a Hiper DSP card and when I boot it up I get the following text from the console (copy/pasted): !!----------> SDL2 for the PPC403 <------------!! __ Enter Download Trigger __ Flash Image Has Valid CRC, Loading Image.... Diagnostic Power-Up Failure Manufacturing Info -> 1AAA13M0 Mode/Env -> 1/0 Fault Code -> 0-5-3-1 Expected Data -> 00000000 Received Data -> 00000800 Text Message -> Data Path Test Failure ---------[end of copy/paste]-------- Unfortunately I couldn't find anything at 3COM's knowledge which seemed relevant. My office does not have any documentation what so ever on our usr-tc equipment. Various searches on Google didn't bring anything up, and searching the list's 17 Megabyte archive file came up empty. Another employee before me had tried to flash the ROM and reflash it (using: HD020019.DMF) but the error remained. Has anyone run into this error before, can what worked for you or was it dead? If not, does anyone have any good resources or links they can suggest I look at for this problem? Thanks. Jon Cloud.