We have a Mac OS 9.2 user who dials in to the TC-1000 and disconnects after a while. He is sure he has a good line quality. I monitored his PPP session, and the last messages I got were the following before he disconnected: Incoming PPP Data on interface: slot:1/mod:10 Time: 25-DEC-2002 14:09:51 LCP ECHO_REQ fc 15 d9 b4 a5 a5 a5 a5 Outgoing PPP Data on interface: slot:1/mod:10 Time: 25-DEC-2002 14:09:51 LCP ECHO_RPLY 56 5a f1 a6 Any idea why he disconnects? Does anybody know how to force modem to V.34 on a MAC OS 9.2 machine and how to turn LCP Echo off? Thank you ----- Original Message ----- From: <usr-tc-request@mailman.xmission.com> To: <usr-tc@mailman.xmission.com> Sent: Friday, December 13, 2002 8:59 PM Subject: USR-TC digest, Vol 1 #368 - 4 msgs
Send USR-TC mailing list submissions to usr-tc@mailman.xmission.com
To subscribe or unsubscribe via the World Wide Web, visit http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc or, via email, send a message with subject or body 'help' to usr-tc-request@mailman.xmission.com
You can reach the person managing the list at usr-tc-admin@mailman.xmission.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of USR-TC digest..."
Today's Topics:
1. Re: MultiSpan / Hiper Bundles - 1year warranty (Thomas_Goodman@3com.com) 2. Re: MultiSpan / Hiper Bundles - 1year warranty (Stephen Rivera - WRCA.Net) 3. RE: Strange Error messages (MacDonald, James) 4. Hiper Arc Issues (Travis M. Best)
--__--__--
Message: 1 Subject: Re: [USR-TC] MultiSpan / Hiper Bundles - 1year warranty To: usr-tc@mailman.xmission.com From: Thomas_Goodman@3com.com Date: Fri, 13 Dec 2002 12:23:39 -0600 Reply-To: usr-tc@mailman.xmission.com
Steve,
Who does the Warrantee work? How does your warrantee work?
Product purchased Used is not covered under the CommWorks Warrantee. Even if its never been open.
Let me know,
TG
"Stephen Rivera - WRCA.Net" <steverivera@wrca.net>@mailman.xmission.com on 12/12/2002 11:07:01 AM
Please respond to usr-tc@mailman.xmission.com
Sent by: usr-tc-admin@mailman.xmission.com
To: "usr-tc @lists.xmission.com" <usr-tc@mailman.xmission.com> cc: Subject: [USR-TC] MultiSpan / Hiper Bundles - 1year warranty
As you guys can tell the market is full of the TC1000. As I buy them I am pleasantly surprised to see the recent codes and cards. The result: 1 year warranty.
192 port MultiSpan TC1000 V.92 Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 (2) 96port Multi Span Nac's (2) Hiper Access Router Card 128/16 Hiper NMC (2) AC PSU 130 Amp Nac $7500 - 1 year warranty
336 port TC1000 v92 Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 Hiper NMC (2) Hiper ARC 128Mb version (NIC/NAC set) (14) Hiper DSP (T-1 NIC/NAC) $7000.00 - 1 year warranty
If you are looking for individual cards I have them too.
Technical Support Available.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
--__--__--
Message: 2 Date: Fri, 13 Dec 2002 13:36:09 -0500 From: "Stephen Rivera - WRCA.Net" <steverivera@wrca.net> Subject: Re: [USR-TC] MultiSpan / Hiper Bundles - 1year warranty To: usr-tc@mailman.xmission.com Reply-To: usr-tc@mailman.xmission.com
Sorry for a delay in my response. I should have explained that warranty better.
Sorry Tom.
1 year warranty Exchange and / or repair Through WRCA - Me.
This warranty has nothing to do with Commworks. Cant you tell. Look at the price :)
At 12:23 PM 12/13/2002 -0600, you wrote:
Steve,
Who does the Warrantee work? How does your warrantee work?
Product purchased Used is not covered under the CommWorks Warrantee. Even if its never been open.
Let me know,
TG
"Stephen Rivera - WRCA.Net" <steverivera@wrca.net>@mailman.xmission.com on 12/12/2002 11:07:01 AM
Please respond to usr-tc@mailman.xmission.com
Sent by: usr-tc-admin@mailman.xmission.com
To: "usr-tc @lists.xmission.com" <usr-tc@mailman.xmission.com> cc: Subject: [USR-TC] MultiSpan / Hiper Bundles - 1year warranty
As you guys can tell the market is full of the TC1000. As I buy them I am pleasantly surprised to see the recent codes and cards. The result: 1 year warranty.
192 port MultiSpan TC1000 V.92 Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 (2) 96port Multi Span Nac's (2) Hiper Access Router Card 128/16 Hiper NMC (2) AC PSU 130 Amp Nac $7500 - 1 year warranty
336 port TC1000 v92 Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 Hiper NMC (2) Hiper ARC 128Mb version (NIC/NAC set) (14) Hiper DSP (T-1 NIC/NAC) $7000.00 - 1 year warranty
If you are looking for individual cards I have them too.
Technical Support Available.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net
--__--__--
Message: 3 From: "MacDonald, James" <James.MacDonald@attcanada.com> To: "'usr-tc@mailman.xmission.com'" <usr-tc@mailman.xmission.com> Subject: RE: [usr-tc] Strange Error messages Date: Fri, 13 Dec 2002 11:36:41 -0700 Reply-To: usr-tc@mailman.xmission.com
it was set to static instead of dynamic assignment ... we changed it and rebooted. It seems to have cleared the errors.
-----Original Message----- From: Charles Sprickman [mailto:spork@inch.com] Sent: December 13, 2002 3:14 AM To: usr-tc@lists.xmission.com Subject: Re: [usr-tc] Strange Error messages
On Thu, 12 Dec 2002, MacDonald, James wrote:
Level "UNUSUAL":: Illegal CMN FSM Event, Interface: slot:2/mod:1
and we "don't" currently have a DSP in slot 2 ... wierd!
What's the overall chassis config? More than one arc? If so, which is sending this log message? Seems like the ARC is a bit confused about what's where. What's a 'list chassis' show on this arc?
C
James MacDonald, CCNP Senior Platform Manager, IP Network Operations AT&T Canada Corp. 370 King St W., 6th Floor Toronto, ON M5V1J9 Ph: 416-204-5793 Fx: 416-204-5744 Emergency: 416-204-5700 (NMC Hotline) Email: james.macdonald@attcanada.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
--__--__--
Message: 4 From: "Travis M. Best" <sysadmin@sunqwest.net> To: <usr-tc@mailman.xmission.com> Date: Fri, 13 Dec 2002 13:57:47 -0500 Subject: [USR-TC] Hiper Arc Issues Reply-To: usr-tc@mailman.xmission.com
This is a multi-part message in MIME format.
------=_NextPart_000_0007_01C2A2AF.A2192A90 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0008_01C2A2AF.A2192A90"
------=_NextPart_001_0008_01C2A2AF.A2192A90 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
I am having a problem that when I reboot my hiper arc card through telnet my modem card don't come back up I have attached a copy of the config's after a reboot and after a power down
Thanks, Travis Best Systems Administrator
------=_NextPart_001_0008_01C2A2AF.A2192A90 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
<html xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns=3D"http://www.w3.org/TR/REC-html40">
<head> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii">
<meta name=3DProgId content=3DWord.Document> <meta name=3DGenerator content=3D"Microsoft Word 10"> <meta name=3DOriginator content=3D"Microsoft Word 10"> <link rel=3DFile-List href=3D"cid:filelist.xml@01C2A2AF.9DAB7030"> <!--[if gte mso 9]><xml> <o:OfficeDocumentSettings> <o:DoNotRelyOnCSS/> </o:OfficeDocumentSettings> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:SpellingState>Clean</w:SpellingState> <w:GrammarState>Clean</w:GrammarState> <w:DocumentKind>DocumentEmail</w:DocumentKind> <w:EnvelopeVis/> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--> <style> <!-- /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman";} a:link, span.MsoHyperlink {color:blue; text-decoration:underline; text-underline:single;} a:visited, span.MsoHyperlinkFollowed {color:purple; text-decoration:underline; text-underline:single;} span.EmailStyle17 {mso-style-type:personal-compose; mso-style-noshow:yes; mso-ansi-font-size:10.0pt; mso-bidi-font-size:10.0pt; font-family:Arial; mso-ascii-font-family:Arial; mso-hansi-font-family:Arial; mso-bidi-font-family:Arial; color:windowtext;} span.SpellE {mso-style-name:""; mso-spl-e:yes;} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} --> </style> <!--[if gte mso 10]> <style> /* Style Definitions */=20 table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} </style> <![endif]--> </head>
<body lang=3DEN-US link=3Dblue vlink=3Dpurple = style=3D'tab-interval:.5in'>
<div class=3DSection1>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span = style=3D'font-size:10.0pt; font-family:Arial'>I am having a problem that when I reboot my <span class=3DSpellE>hiper</span> arc card through telnet my modem card = don’t come back up I have attached a copy of the <span = class=3DSpellE>config’s</span> after a reboot and after a power down<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span = style=3D'font-size:10.0pt; font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span = style=3D'font-size:10.0pt; font-family:Arial;mso-no-proof:yes'>Thanks,</span></font><span style=3D'mso-no-proof:yes'><o:p></o:p></span></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span = style=3D'font-size:10.0pt; font-family:Arial;mso-no-proof:yes'>Travis Best</span></font><span style=3D'mso-no-proof:yes'><o:p></o:p></span></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span = style=3D'font-size:10.0pt; font-family:Arial;mso-no-proof:yes'>Systems = Administrator</span></font><span style=3D'mso-no-proof:yes'><o:p></o:p></span></p>
<p class=3DMsoNormal><font size=3D3 face=3D"Times New Roman"><span = style=3D'font-size: 12.0pt;mso-no-proof:yes'> </span><o:p></o:p></font></p>
<p class=3DMsoNormal><font size=3D3 face=3D"Times New Roman"><span = style=3D'font-size: 12.0pt'><o:p> </o:p></span></font></p>
</div>
</body>
</html>
------=_NextPart_001_0008_01C2A2AF.A2192A90--
------=_NextPart_000_0007_01C2A2AF.A2192A90 Content-Type: text/plain; name="after reboot command.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="after reboot command.txt"
HiPer>> reboot
BOOT PROM Version 1.16 (Built on June 9th, 1998 at 12:24:24) Loading kernel ... OK Initializing timer ... OK Initializing TFTP driver ... OK Initializing flash driver ... OK
HiPer Access Router Boot Configuration -------------------------------------- =20 1. Boot mode : FLASH 2. IP Configuration Source : STATIC 3. Boot IP Interface : eth:1 4. Boot IP Address : 0.0.0.0 5. Boot IP Default Gateway : 0.0.0.0 6. Boot IP Network Mask : 0.0.0.0 7. TFTP Image on Startup : NEVER 8. TFTP Boot Server IP Address : 0.0.0.0 9. TFTP Boot Image File Name : =20 10. Crash upload : DISABLED 11. Crash Dump Upload Filename : =20 12. Manufacturing Diagnostics : NONE 13. Delete Router Configuration : =20 14. Delete Boot Configuration : =20 15. Command Line Parameters : =20 16. File System Sync Mode : =20 E. Exit =20
Enter Choice : [E] TIMED OUT
Attempting auto-load from Flash ... IPX/IP Dial-out networking software is Copyright (c)1985-1996, Network Products Corporation (Pasadena, CA) All rights reserved. AppleTalk-compatible networking software is Copyright 1993-1995, Quiotix Corporation (Menlo Park, CA) All rights reserved. TCP/IP networking software is Copyright 1988-1995, Epilogue Corporation, Albuquerque NM, All rights reserved. IP routing software is Copyright 1993-1995, RainbowBridge Communication. Inc. Rockville MD, All rights = reserved. IPX networking software is Copyright 1994-1995, RouterWare Inc. Newport Beach CA, Unpublished - rights reserved under the Copyright Laws of the United States. VJ TCP Header Compression software is Copyright (c) 1989, 1991, 1992, = 1993, Regents of the University of California. All rights reserved.
HiPer, V5.3.2 3Com Corporation, Santa Clara, California The software contained in this product is Copyright 1997-2001, 3Com Corporation, Santa Clara, California All rights reserved.
Starting up the HiPer system Executive... Starting up HiPer Configuration process...
HiPer Configuration Process starting......
HiPer Initializing Network Management Processes...
HiPer starting RoboExec NetMan process......
HiPer starting Event Handler process......
HiPer configuring interfaces......
HiPer starting required processes......
HiPer starting Call Initiator process (CIP)......
HiPer configuring devices in CIP......
HiPer configuring datalink layers......
HiPer configuring networks......
HiPer Adding networks to LAN interfaces....
HiPer enabling networks on LAN interfaces....
Configuring Network Services.....
Starting the CLI...... Please Wait for Prompt... HiPer>> show config CONFIGURATION SETTINGS
System Identification: Name: SQ1 Contact: Travis M. Best
RADIUS Authentication Remote: ENABLED Local: ENABLED =20 Primary Server: 205.245.83.40 Secondary Server: 205.245.83.50 Tertiary Server: 0.0.0.0
Remote Accounting: ENABLED =20 Primary Server: 205.245.83.40 Secondary Server: 205.245.83.50 Interfaces:=20 eth:1 eth:2 =20 internal =20 loopback =20
IP Forwarding: ENABLED Routing: ENABLED RIP: ENABLED =20 ip ETHERNET_II eth:1 = 205.245.83.4/C=20 secclassc ETHERNET_II eth:1 = 63.168.23.2/C=20 ip65-169-4 ETHERNET_II eth:2 = 65.169.4.2/A=20 IP-loopback LOOPBACK loopback = 127.0.0.1/H=20
PPP Receive Authentication: ANY =20 --More-- = =20 DNS Domain: ras3.sunqwest.net Servers:=20 Preference Name IP Address 1 ns1.sunqwest.net 205.245.83.40 2 ns2.sunqwest.net 205.245.83.50
CLI - There are no networks configured for IPX =20 HiPer>> show nmc
NMC SETTINGS Chassis Awareness: ENABLED =20 Dynamic Slot Assignment: DISABLED =20 DSA Idle Rebalancing: ENABLED =20 SNMP Forwarding: ENABLED =20 HiPer>> show chassis CLI - Missing Required Argument(s):
This field is a KEYWORD. The possible values are: MODEM_NAMING SLOT =20 HiPer>> list chassis Slot Owner Description Ports Type = Console 1 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 2 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 3 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 4 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 5 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 6 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 7 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 8 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 9 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 10 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 11 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 12 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 13 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 14 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 15 YES --EMPTY-- 0 STATIC = NO =20 16 YES HiPer Access Router NAC 0 = DYNAMIC NO =20
------=_NextPart_000_0007_01C2A2AF.A2192A90 Content-Type: text/plain; name="after power reset.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="after power reset.txt"
BOOT PROM Version 1.16 (Built on June 9th, 1998 at 12:24:24) Loading kernel ... OK Initializing timer ... OK Initializing TFTP driver ... OK Initializing flash driver ... OK
HiPer Access Router Boot Configuration -------------------------------------- =20 1. Boot mode : FLASH 2. IP Configuration Source : STATIC 3. Boot IP Interface : eth:1 4. Boot IP Address : 0.0.0.0 5. Boot IP Default Gateway : 0.0.0.0 6. Boot IP Network Mask : 0.0.0.0 7. TFTP Image on Startup : NEVER 8. TFTP Boot Server IP Address : 0.0.0.0 9. TFTP Boot Image File Name : =20 10. Crash upload : DISABLED 11. Crash Dump Upload Filename : =20 12. Manufacturing Diagnostics : NONE 13. Delete Router Configuration : =20 14. Delete Boot Configuration : =20 15. Command Line Parameters : =20 16. File System Sync Mode : =20 E. Exit =20
Enter Choice : [E] TIMED OUT
Attempting auto-load from Flash ... IPX/IP Dial-out networking software is Copyright (c)1985-1996, Network Products Corporation (Pasadena, CA) All rights reserved. AppleTalk-compatible networking software is Copyright 1993-1995, Quiotix Corporation (Menlo Park, CA) All rights reserved. TCP/IP networking software is Copyright 1988-1995, Epilogue Corporation, Albuquerque NM, All rights reserved. IP routing software is Copyright 1993-1995, RainbowBridge Communication. Inc. Rockville MD, All rights = reserved. IPX networking software is Copyright 1994-1995, RouterWare Inc. Newport Beach CA, Unpublished - rights reserved under the Copyright Laws of the United States. VJ TCP Header Compression software is Copyright (c) 1989, 1991, 1992, = 1993, Regents of the University of California. All rights reserved.
HiPer, V5.3.2 3Com Corporation, Santa Clara, California The software contained in this product is Copyright 1997-2001, 3Com Corporation, Santa Clara, California All rights reserved.
Starting up the HiPer system Executive... Starting up HiPer Configuration process...
HiPer Configuration Process starting......
HiPer Initializing Network Management Processes...
HiPer starting RoboExec NetMan process......
HiPer starting Event Handler process......
HiPer configuring interfaces......
HiPer starting required processes......
HiPer starting Call Initiator process (CIP)......
HiPer configuring devices in CIP......
HiPer configuring datalink layers......
HiPer configuring networks......
HiPer Adding networks to LAN interfaces....
HiPer enabling networks on LAN interfaces....
Configuring Network Services.....
Starting the CLI...... Please Wait for Prompt... HiPer>> SHOW CONFIG=08 =08=08 =08=08 =08=08 =08=08 =08=08 =08=08 =08=08 = =08=08 =08=08 =08=08 =08show config CONFIGURATION SETTINGS
System Identification: Name: SQ1 Contact: Travis M. Best
RADIUS Authentication Remote: ENABLED Local: ENABLED =20 Primary Server: 205.245.83.40 Secondary Server: 205.245.83.50 Tertiary Server: 0.0.0.0
Remote Accounting: ENABLED =20 Primary Server: 205.245.83.40 Secondary Server: 205.245.83.50 Interfaces:=20 SLOT:1/CON:1 SLOT:2/CON:1 SLOT:3/CON:1 = =20 SLOT:4/CON:1 SLOT:5/CON:1 SLOT:6/CON:1 = =20 SLOT:7/CON:1 SLOT:8/CON:1 SLOT:9/CON:1 = =20 SLOT:10/CON:1 SLOT:11/CON:1 SLOT:12/CON:1 = =20 SLOT:13/CON:1 SLOT:14/CON:1 =20 eth:1 eth:2 =20 internal =20 loopback =20 slot:1/mod:1 slot:1/mod:2 slot:1/mod:3 = =20 slot:1/mod:4 slot:1/mod:5 slot:1/mod:6 = =20 slot:1/mod:7 slot:1/mod:8 slot:1/mod:9 = =20 --More-- = slot:1/mod:10 slot:1/mod:11 = slot:1/mod:12 =20 --More-- = slot:1/mod:13 slot:1/mod:14 = slot:1/mod:15 =20 --More-- = slot:1/mod:16 slot:1/mod:17 = slot:1/mod:18 =20 slot:1/mod:19 slot:1/mod:20 slot:1/mod:21 = =20 slot:1/mod:22 slot:1/mod:23 slot:2/mod:1 = =20 slot:2/mod:2 slot:2/mod:3 slot:2/mod:4 = =20 slot:2/mod:5 slot:2/mod:6 slot:2/mod:7 = =20 slot:2/mod:8 slot:2/mod:9 slot:2/mod:10 = =20 slot:2/mod:11 slot:2/mod:12 slot:2/mod:13 = =20 slot:2/mod:14 slot:2/mod:15 slot:2/mod:16 = =20 slot:2/mod:17 slot:2/mod:18 slot:2/mod:19 = =20 slot:2/mod:20 slot:2/mod:21 slot:2/mod:22 = =20 slot:2/mod:23 slot:3/mod:1 slot:3/mod:2 = =20 slot:3/mod:3 slot:3/mod:4 slot:3/mod:5 = =20 slot:3/mod:6 slot:3/mod:7 slot:3/mod:8 = =20 slot:3/mod:9 slot:3/mod:10 slot:3/mod:11 = =20 slot:3/mod:12 slot:3/mod:13 slot:3/mod:14 = =20 slot:3/mod:15 slot:3/mod:16 slot:3/mod:17 = =20 slot:3/mod:18 slot:3/mod:19 slot:3/mod:20 = =20 slot:3/mod:21 slot:3/mod:22 slot:3/mod:23 = =20 slot:4/mod:1 slot:4/mod:2 slot:4/mod:3 = =20 slot:4/mod:4 slot:4/mod:5 slot:4/mod:6 = =20 slot:4/mod:7 slot:4/mod:8 slot:4/mod:9 = =20 slot:4/mod:10 slot:4/mod:11 slot:4/mod:12 = =20 slot:4/mod:13 slot:4/mod:14 slot:4/mod:15 = =20 --More-- = slot:4/mod:16 slot:4/mod:17 = slot:4/mod:18 =20 slot:4/mod:19 slot:4/mod:20 slot:4/mod:21 = =20 slot:4/mod:22 slot:4/mod:23 slot:5/mod:1 = =20 slot:5/mod:2 slot:5/mod:3 slot:5/mod:4 = =20 slot:5/mod:5 slot:5/mod:6 slot:5/mod:7 = =20 slot:5/mod:8 slot:5/mod:9 slot:5/mod:10 = =20 slot:5/mod:11 slot:5/mod:12 slot:5/mod:13 = =20 slot:5/mod:14 slot:5/mod:15 slot:5/mod:16 = =20 slot:5/mod:17 slot:5/mod:18 slot:5/mod:19 = =20 slot:5/mod:20 slot:5/mod:21 slot:5/mod:22 = =20 slot:5/mod:23 slot:6/mod:1 slot:6/mod:2 = =20 slot:6/mod:3 slot:6/mod:4 slot:6/mod:5 = =20 slot:6/mod:6 slot:6/mod:7 slot:6/mod:8 = =20 slot:6/mod:9 slot:6/mod:10 slot:6/mod:11 = =20 slot:6/mod:12 slot:6/mod:13 slot:6/mod:14 = =20 slot:6/mod:15 slot:6/mod:16 slot:6/mod:17 = =20 slot:6/mod:18 slot:6/mod:19 slot:6/mod:20 = =20 slot:6/mod:21 slot:6/mod:22 slot:6/mod:23 = =20 slot:7/mod:1 slot:7/mod:2 slot:7/mod:3 = =20 slot:7/mod:4 slot:7/mod:5 slot:7/mod:6 = =20 slot:7/mod:7 slot:7/mod:8 slot:7/mod:9 = =20 slot:7/mod:10 slot:7/mod:11 slot:7/mod:12 = =20 slot:7/mod:13 slot:7/mod:14 slot:7/mod:15 = =20 --More-- = slot:7/mod:16 slot:7/mod:17 = slot:7/mod:18 =20 slot:7/mod:19 slot:7/mod:20 slot:7/mod:21 = =20 slot:7/mod:22 slot:7/mod:23 slot:8/mod:1 = =20 slot:8/mod:2 slot:8/mod:3 slot:8/mod:4 = =20 slot:8/mod:5 slot:8/mod:6 slot:8/mod:7 = =20 slot:8/mod:8 slot:8/mod:9 slot:8/mod:10 = =20 slot:8/mod:11 slot:8/mod:12 slot:8/mod:13 = =20 slot:8/mod:14 slot:8/mod:15 slot:8/mod:16 = =20 slot:8/mod:17 slot:8/mod:18 slot:8/mod:19 = =20 slot:8/mod:20 slot:8/mod:21 slot:8/mod:22 = =20 slot:8/mod:23 slot:9/mod:1 slot:9/mod:2 = =20 slot:9/mod:3 slot:9/mod:4 slot:9/mod:5 = =20 slot:9/mod:6 slot:9/mod:7 slot:9/mod:8 = =20 slot:9/mod:9 slot:9/mod:10 slot:9/mod:11 = =20 slot:9/mod:12 slot:9/mod:13 slot:9/mod:14 = =20 slot:9/mod:15 slot:9/mod:16 slot:9/mod:17 = =20 slot:9/mod:18 slot:9/mod:19 slot:9/mod:20 = =20 slot:9/mod:21 slot:9/mod:22 slot:9/mod:23 = =20 slot:10/mod:1 slot:10/mod:2 slot:10/mod:3 = =20 slot:10/mod:4 slot:10/mod:5 slot:10/mod:6 = =20 slot:10/mod:7 slot:10/mod:8 slot:10/mod:9 = =20 slot:10/mod:10 slot:10/mod:11 slot:10/mod:12 = =20 slot:10/mod:13 slot:10/mod:14 slot:10/mod:15 = =20 --More-- = slot:10/mod:16 slot:10/mod:17 = slot:10/mod:18 =20 slot:10/mod:19 slot:10/mod:20 slot:10/mod:21 = =20 slot:10/mod:22 slot:10/mod:23 slot:11/mod:1 = =20 slot:11/mod:2 slot:11/mod:3 slot:11/mod:4 = =20 slot:11/mod:5 slot:11/mod:6 slot:11/mod:7 = =20 slot:11/mod:8 slot:11/mod:9 slot:11/mod:10 = =20 slot:11/mod:11 slot:11/mod:12 slot:11/mod:13 = =20 slot:11/mod:14 slot:11/mod:15 slot:11/mod:16 = =20 slot:11/mod:17 slot:11/mod:18 slot:11/mod:19 = =20 slot:11/mod:20 slot:11/mod:21 slot:11/mod:22 = =20 slot:11/mod:23 slot:12/mod:1 slot:12/mod:2 = =20 slot:12/mod:3 slot:12/mod:4 slot:12/mod:5 = =20 slot:12/mod:6 slot:12/mod:7 slot:12/mod:8 = =20 slot:12/mod:9 slot:12/mod:10 slot:12/mod:11 = =20 slot:12/mod:12 slot:12/mod:13 slot:12/mod:14 = =20 slot:12/mod:15 slot:12/mod:16 slot:12/mod:17 = =20 slot:12/mod:18 slot:12/mod:19 slot:12/mod:20 = =20 slot:12/mod:21 slot:12/mod:22 slot:12/mod:23 = =20 slot:13/mod:1 slot:13/mod:2 slot:13/mod:3 = =20 slot:13/mod:4 slot:13/mod:5 slot:13/mod:6 = =20 slot:13/mod:7 slot:13/mod:8 slot:13/mod:9 = =20 slot:13/mod:10 slot:13/mod:11 slot:13/mod:12 = =20 slot:13/mod:13 slot:13/mod:14 slot:13/mod:15 = =20 --More-- = slot:13/mod:16 slot:13/mod:17 = slot:13/mod:18 =20 slot:13/mod:19 slot:13/mod:20 slot:13/mod:21 = =20 slot:13/mod:22 slot:13/mod:23 slot:14/mod:1 = =20 slot:14/mod:2 slot:14/mod:3 slot:14/mod:4 = =20 slot:14/mod:5 slot:14/mod:6 slot:14/mod:7 = =20 slot:14/mod:8 slot:14/mod:9 slot:14/mod:10 = =20 slot:14/mod:11 slot:14/mod:12 slot:14/mod:13 = =20 slot:14/mod:14 slot:14/mod:15 slot:14/mod:16 = =20 slot:14/mod:17 slot:14/mod:18 slot:14/mod:19 = =20 slot:14/mod:20 slot:14/mod:21 slot:14/mod:22 = =20 slot:14/mod:23 =20
IP Forwarding: ENABLED Routing: ENABLED RIP: ENABLED =20 ip ETHERNET_II eth:1 = 205.245.83.4/C=20 secclassc ETHERNET_II eth:1 = 63.168.23.2/C=20 ip65-169-4 ETHERNET_II eth:2 = 65.169.4.2/A=20 IP-loopback LOOPBACK loopback = 127.0.0.1/H=20 dump-ip-I1261 PPP slot:1/mod:5 = 65.169.4.3/H=20 golfnut-ip-I1260 PPP slot:1/mod:4 = 63.168.23.3/H=20 bones_p68-ip-I1263 PPP slot:1/mod:7 = 63.168.23.4/H=20 girlgc311-ip-I1258 PPP slot:1/mod:2 = 205.245.83.100/H=20 ip-65.169.4.4-I1265 PPP slot:1/mod:9 = 65.169.4.4/H=20 heavenangel-ip-I1262 PPP slot:1/mod:6 = 205.245.83.101/H=20 --More-- = =20 PPP Receive Authentication: ANY =20 Datalinks:=20 1 Opened =20 26740672Opened slot:1/mod:2 2 Opened =20 27357568Opened slot:1/mod:4 3 Opened =20 27874176Opened slot:1/mod:5 4 Opened =20 28100544Opened slot:1/mod:6 5 Opened =20 27649536Opened slot:1/mod:7 6 Opened =20 26787328Opened slot:1/mod:9
DNS Domain: ras3.sunqwest.net Servers:=20 Preference Name IP Address 1 ns1.sunqwest.net 205.245.83.40 2 ns2.sunqwest.net 205.245.83.50
--More-- = CLI - There are no networks configured for IPX =20 HiPer>> show nmc
NMC SETTINGS Chassis Awareness: ENABLED =20 Dynamic Slot Assignment: DISABLED =20 DSA Idle Rebalancing: ENABLED =20 SNMP Forwarding: ENABLED =20 HiPer>>=20 HiPer>> show nmc HiPer>> show config HiPer>> show nmc HiPer>> list chassis Slot Owner Description Ports Type = Console 1 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 2 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 3 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 4 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 5 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 6 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 7 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 8 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 9 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 10 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 11 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 12 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 13 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 14 YES 24 Channel High Density Modem 23 = DYNAMIC YES=20 15 YES --EMPTY-- 0 STATIC = NO =20 16 YES HiPer Access Router NAC 0 = DYNAMIC NO =20 HiPer>> ------=_NextPart_000_0007_01C2A2AF.A2192A90--
--__--__--
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
End of USR-TC Digest