Thanks for that command. I could have used that a month ago (before I joined the list). -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Mike Greene Sent: Tuesday, March 11, 2003 4:32 PM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] IP Pool Size At 03:54 PM 3/11/2003 -0600, you wrote:
Hi. We just added a second Channelize T1 and it's not taking calls. Specifically, it's answering, but not authenticating. When I console into the HiperARC, I see an alert that the ''facility IP level critical, not IP address available for IP assignment''
I know we did this when we setup the Chassis last year, but.... So, urgently, how does one go about increasing the size of our IP pool from
24 to 48 IP's?
I only have console access, since my Arc software doesn't take to my HiperARC (To new...)
set ip pool "name" size <1-4096> "name" = name of your ip pool Or you can create a another pool and have it start where the first one ends. Having multiple pools is a very handy thing, I have 3 pools for each arc, 2 arcs per chassis. (one arc does odd DSP's the other does even DSP's). - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc