-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 It's most likely because chassis awareness is not enabled ; there are a couple of ways to handle this. Leave chassis awareness off and manually set the card type in the ARC: set chassis slot 1-13 card_type hdm_24 Or enable chassis awareness: enable nmc chasSIS_AWARENESS The older code bases sometimes had problems with dynamic slot assignment and chassis awareness, so it might be prudent to upgrade to the latest code on all your cards if you plan on using the chassis awareness features. Jeremy Malli Alpha Geek - Visionary jeremy@vcn.com - -----Original Message----- From: Patrick Ndegwa [mailto:pndegwa@ke.uu.net] Sent: Thursday, May 09, 2002 9:36 AM To: jeremy@vdom.vcn.com Subject: [USR-TC] Problem with Hiper DSP and Hiper ARC cards Hi there. I have an USR Total Control Chassis with a Hiper DSP Card (ver 2.1.9), Hiper ARC Card (5.0.9) and an NMC (6.0.9). The problem is that the Hiper ARC is unable to see the Hiper DSP Card (shows chassis slot is empty). I have tried different combinations of chassis slots with no good result. I have even tried to change the chassis with no positive results either. I was wondering if anyone has experienced this or has any suggestions on how to solve the problem. Interestingly enough, using TCM, I am able to recognize both the Hiper ARC card and the Hiper DSP. Cheers, Patrick Ndegwa, Technical Operations, UUNET Kenya Ltd. Tel: +254 2 690 88000 Fax: +254 2 690 88001 http://www.uunet.co.ke - --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.360 / Virus Database: 199 - Release Date: 5/7/2002 _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com> iQA/AwUBPNqg4a4rr0dTgl17EQL2YACfY9kum8X4c/3gNqUUF4HXZ78GcbkAoLAZ jr9Jmt9NKsU6/djBAp6oRdWO =j+Uz -----END PGP SIGNATURE-----