Thanks for all the help, but no luck. Anyone want to buy a SLIGHTLY USED Cisco 802 router, the customer we bought it for has moved on. Regards, Jim Jim Johnson wrote:
We are trying to connect a Cisco 802 to our HiperARC chassis using ISDN and not having much success.
Mon Radius shows the router authenticated fine.
Mon PPP shows only an Outgoing PAP AUTH packet on the link.
The router shows that it was authenticated.
But then there is no additional PPP traffic.
Eventually, the ARC gets an incoming LCP TERM packet from the router when the router decides to close down the link.
The radius entry for the router is:
router Password=secret Framed-IP-Address=xxx.xxx.32.35, Framed-IP-Netmask=255.255.255.255, Framed-Route="xxx.xxx.33.8/30 xxx.xxx.32.35 1"
I'm sure there is something realy simple I am missing here...
Thanks,
-Jim Johnson
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.