Pablo, I am not aware of any way to pull the flash image from a secondary card. In fact, I'm fairly certain that you are not able to flash the card unless you have a flash file, which can be uploaded via console or TCM/CEM. If you find otherwise, please post it to the list. Good luck, Adam -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Pablo Sadier Sent: Friday, May 07, 2004 4:35 PM To: USR Subject: [USR-TC] Problem with Hiper DSP Card Hi: I have a Hiper DSP Card with the run/fl light blinking, the card's flash gives a CRC error. (i see this whem using the console port). I have other's card working fine but i don't know how i can download the flash from these other cards., i tried with the Total control manager but i can flash the card only if i have the flash file beforehand. Any help appreciated... Regards, Pablo Sadier IntermediaSP. pablo.sadier@intermediasp.com Intermedia Comunicaciones SA L.N. Alem 668 P. 4 C1001AAO Buenos Aires - Argentina Tel: (54-11) 5032-9999 Fax: (54-11) 5032-9992