I got a chassis with 7 E1 DSP's in it, a Hiper ARC, and a Hiper NMC. At first, TCM wouldn't even let me see settings on the DSP's. Someone here on the list suggested updating the code on the NMC. So I loaded 8.6.3 on it. Then I could see the trunk settings. NOW... if I go to Configure->Actions/Commands, it won't let me run any commands on the DSP's. I can't even force a hardware reset. After I try to execute any command, in the status area at the bottom of the window, it displays the Device(s), pauses for a few seconds, then just says "No Command" under the Command column and nothing happens. Any suggestions? Thanks, Joel -----Original Message----- From: David E. Smith [mailto:dave@mvn.net] Sent: Friday, August 06, 2004 11:50 AM To: Adam Barnhill Cc: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] Help: Dropping packets for not-in-use IPs On 6 Aug 2004 at 11:40, Adam Barnhill wrote:
HiPer>>enable ip send_host_unreach_for_pool
THIS is why I love mailing lists. Thanks! (If the semo in semo.net is for Southeast Missouri, I owe you a beer next time I'm in Cape Girardeau.) David Smith MVN.net _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc