Hi , Is the modem enforcing a maximum signal level on country-code basis? If so, can I bypass this limit? No depending on your country code setting for each country , you have and max and a min range with in that you can not change. Ray W Dan Borlovan <danb@dnttm.ro> on 01/02/2000 10:35:01 Please respond to usr-tc@lists.xmission.com Sent by: Dan Borlovan <danb@dnttm.ro> To: usr-tc@lists.xmission.com cc: (Ray Whelan/IE/3Com) Subject: Re: (usr-tc) Quad modem x2 tx level On Mon, 31 Jan 2000, Ray Whelan wrote:
There are slight differences in setting between modems from different country settings, as our modems must comply with the different country specification settings set by each Telco , ATI7 tells you your country code setting.
Is the modem enforcing a maximum signal level on country-code basis? If so, can I bypass this limit?
By the way -10 dB is a stronger signal than -12 dB
Yes I know, and -10dB gives me better x2 connect speeds. Dan -- Dan Borlovan <danb@dnttm.ro> System Administrator, Network Operation Center Dynamic Network Technologies - Timisoara, Romania Telefon: +40-56-204967 FAX: +40-56-220201 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.