I'm pretty sure both of these issues had been answered awhile back, but I can't seem to find the information. So, here goes... 1. I have a chassis with a current address pool of 96 addresses. The /24 the pool is taking from has no more available addresses. I want to swap it out for a 200 address pool from another /24. How do I do this? 2. I have a dedicated ISDN user that needs 60 routable addresses for his LAN. Preferably, the assigned /26 would be from a seperate /24 than the one his static dial-up IP is from. What do I need to set up on the ARC so it routes his /26 through the static IP? Would it be easier to just make his static IP the initial address in the /26 with a 255.255.255.192 mask? Thanks, -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.