At 05:21 PM 3/27/02 -0500, Jeff Mcadams wrote:
Also sprach Kirk Mitchell
I have a customer with a static IP address and a public IP /28 behind his ISDN router. My gateway router is sending traffic for his subnet to the ARC, but the ARC isn't accepting it and sending it down the dial-up connection. What for routing do I need to have set up in the ARC to do this?
Add a "Framed-Route" attribute in the user's RADIUS profile.
I'm not sure how to do this with USR's S&A Server. The Routing section of Radius wants destination1, gateway1, etc. I'm used to thinking of routing in terms of Cisco'ese and not sure how that translates to what I need to enter here. Also, to make sure I explained things properly, the customer's static IP and his subnet are from different blocks... static IP is 55.66.77.198 subnet is 22.33.44.224/28 I need something the equivalent of ip route 22.33.44.224 255.255.255.240 55.66.77.198 Thanks, -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net