Didn't see if anyone else helped on this, but I thought I'd share my thoughts - This has happened to me before. One thing may be if you are trying to change a bunch of DSP's all at once. Do fewer at a time or even one at a time and you may not get the error. Another thing - if I remember correctly this happened once or twice when the firmware between the cards was incompatible, for example 3.5.109 on the DSP's and 6.x on an old 486 NMC (just an example, don't know for sure if these were the versions) Hope this helps, thanks, Joel -----Original Message----- From: Cindy Smith [mailto:cindyo@ktc.com] Sent: Wednesday, May 28, 2003 10:08 AM To: USR-TC@mailman.xmission.com Subject: [USR-TC] Error Trying to change Switch Type in TCM Hi, I am using Total Control Manager Windows Version 8.2.6 When every I try to change the Switch type on a HiperDSP card using TCM Windows, I get a Generic Error concerning the Switch Type OID. Does anyone know a work around for this. I am trying to change the switch type to DMS 100 Thanks in Advance, --Cindy -- ----------------------------- Cindy Smith KTC iNet 896-1111 SysAdmin ----------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc