is 2.0.51 really only for .54/.55? I mean reading the pdf, I see a fix for .54/.55 cards, but the rest of the issues looked like they applied to any DSP. Brian On Fri, 21 Jan 2000, Scot Desort wrote:
Paul,
Have you tried 2.0.51 on the DSP's? I know it was really only intended for .54/.55 rev cards, but there are some fixes for Rockwell in there. Might be worth a shot to load it on some cards and see if it makes any difference.
-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Paul Farber Sent: Friday, January 21, 2000 3:28 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) To many drops after connect
Because the call up and complain. I know what you are saying.. it might be the software... but it's been happening far to often to to many people.
Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.