OK... I asked this in this forum earlier and it started a long thread of discussion about the different code congif, but I never got an answer. Are there any "GOTCHAS" when moving from 4.1.59-6 to 4.1.22? And is it safe to load the 2.0.51 code over the 2.0.81 code? I have seen all the comments about rev #'s, but still no comment on whether the above combination of code is "STABLE" Saw a couple of posts that "SETTINGS" were lost on the HiperArc after loading the 4.1.22 code? Would like to hear, private email if you like or to the list about the above software! Thanks again! ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro@wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite R3 FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.