At 09:34 PM 1/9/00 -0500, Jeff Mcadams wrote:
Thus spake Tatai SV Krishnan
On Sun, 9 Jan 2000, K Mitchell wrote:
I want to change the IP pool on my chassis from one class C to another one, while leaving the ARC and NMC with their original IPs from the first class C. Will simply resetting the IP pool in ARC work ok, or do I need to make any special provisions for the changeover? Will the ARC still route to the old addresses on current calls?
Well - you will have to first create a new IP pool with the new IP address, and then disable the first IP pool. If you have users currently dialed in - they will be using the first IP pool - thus you cannot disable and delete the pool.
Actually...I've found you can actually issue the delete command and it works like a charm. The pool will still be there when you do a list ip pools command, since there are still addresses in use, but no new ones will be assigned from it, and when all the addresses in use from that pool are released, the pool does indeed disappear.
I was able to get the new pool in over the weekend with Krish's help, but the ARC isn't routing to the new pool. Apparently I'm missing something. -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.