Hi, my HiperNMC disappeared from my network. Removed and plugged the card back in. Below is what I see. And i can find a red light glowing inside the rear card. Anyone have any ideas what's wrong here? Regards Anil ================================ 3Com SDL2 Revision: 1.0.05 BIOS Extension Link Date Aug 25 1998 at 14:13:08 Initiating Op Equipment List Detected: ******************************************************************* * Platform: Hiper NMC * Flash Amount: 8M * DRAM Amount: 16384K * * Chassis: 16-slot * NIC Type: Ethernet * Clocked Chassis * * PSU 1: INSTALLED * 130 Amps * AC Type * * PSU 2: INSTALLED * 130 Amps * AC Type * * Packet Bus Clock Circuit: Installed * Ambient temp: 75F * ******************************************************************* Power on Self Test in Progress. ...........................................................................................TIMEOUT ** NMC Diagnostics Version 1.1.0. ** Manufacturing Code = 1AAA13M01234 Hardware ID = 0 Detected NMC platform. Test Name Time Status ----------------------------------------+------+-------- DRAM Test ------------------------------- (2) - PASSED Fan Speed Test -------------------------- (2) - PASSED Debug Port Test ------------------------- (2) - PASSED Real Time Clock Test -------------------- (2) - PASSED A to D Test ----------------------------- (2) - ERROR Manufacturing Info -> 1AAA13M0 Mode/Env -> 1/0 Fault Code -> 0-15-1-1 Expected Data -> 0 Received Data -> 0 Address of Failure -> 0 Text Message -> Measured Temperature out of range Info Message -> Expected: 75 +/- 10F Actual: 91F Ethernet NIC (Basic) Test --------------- (2) - PASSED Always Pass Test ------------------------ (2) - PASSED NMC Diagnostics Complete