We don't use public/private in our setup and it works fine, try adding the SNMP again with something other than public and private and test it again. I agree that for security reasons, public/private are not intelligent choices. Brian Becker President Poplar Bluff Internet, Inc. - www.semo.net <http://www.semo.net> Home of www.TotallyFabricated.com <http://www.TotallyFabricated.com> software Director of Jerusalem School of Synoptic Research www.js.org <http://www.js.org> Home of www.JerusalemPerspective.com <http://www.JerusalemPerspective.com> bookstore Personal Pages www.Tonionio.com <http://www.Tonionio.com> & www.BenjaminBecker.com <http://www.BenjaminBecker.com> -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of mmm3@cornell.edu Sent: Thursday, May 18, 2000 10:42 AM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Total Scrutinizer Hum. I had set another community string for security reasons, but putting "public" in there worked. *shrug* As long as it works. Interesting software. Might consider it! Thanks...
Are you sure that you've got a community string in the arc? Try the following command while logged into the Arc: add snmp community public access RO
That should add a community string of public to the Arc and see if it works correctly then.
Brian
********************************************************* Michelle M. Mogil Network and Computing Systems 735 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8521 email: mmm3@cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.