Hi, Are you sure that your console cable is okay, or the port you are using to connect and of course the rate of connection. Sometimes it creates problem, though it's giving output partly. if you have extra TC, you can make it sure with the same cable and port. I guess you have the HiPer ARC User Manual (PIN 1.024.1343-00) and you are following it (Specially Chapter 2, Chapter 9). Unless you are getting the HiPer ARC Access Router Boot Configuration menu, you have some other problem to communicate with TC. By the way, you can drop the dopic at BDLUG too. There are other TC users. Take care. Zahid Hossain On Friday 08 Aug 2003 8:43 pm, Ahamed Bauani wrote:
Hello All
I have a grate problem. Just few days ago our USR-TC is working find. But when we were going to change some configuration like IP address,IP Pool etc it start problem. My current problem is I cann't access to Hiper ARC by consol or from network (Telnet). When we reboot the TC with consol connected it's only showing :
Booting*...*
Loading Kernel....OK
Then no other messages on consol. I tryied to telnet it over network but it didn't respond, ping it, result same. I am sure that this Hiper ARC card is OK, but some how I removed the IP of this and disable administration via consol.
My current position is " I HAVE NO ACCESS TO THIS CARD!!" Think only it's be possible if somehow I can get it back to factory default. Do you have any idea how to set it factory default?
Or any other suggation... really in a bad position. please help.
Thanks in advance;
Ahamed Bauani.
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc