Hello List: I did not receive any response to my post. In my last discussion with Sprint, they informed me that there is no setting they normally provide for an ISDN-PRI's. I have been changing settings to see if something works. I have some new findings: (1) I can test the 3Com with a UID/PW by using the "_auth UID PW" command (2) When I connect a ISDN-PRI line into HiPer DSP, the D-Channel gets locked. Then when I dial-into the line, it is /busy/. Is this information sufficient for somebody to give some hints? Thanks in advance. Kirti -----Original Message----- From: Kirti S. Bajwa [mailto:kbajwa@tib.com] Sent: Thursday, January 20, 2005 1:36 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modem systems.' Subject: RE: [USR-TC] RE: Busy signal!!! Hello list: I am dead end. I posted this message over two months ago. I still have not been able to get settings from the telco (Sprint). Is there anybody in Tennessee who has a ISDN-PRI line (1D+23B) from Sprint? If you do, I appreciate if I can get the settings for the trunk from you!! If somebody has any other suggestion please let me know. Please respond. Thanks in advance. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Wednesday, November 24, 2004 1:48 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] RE: Busy signal!!! I'd try to verify the dsp span settings with the telco. In particular things such as dnis/ani and the number of digits being sent by the switch. If you aren't on the same page with the telco as far as though settings go you can get busy signals. Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa@tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc@mailman.xmission.com> Sent: Wednesday, November 24, 2004 12:42 PM Subject: RE: [USR-TC] RE: Busy signal!!!
Todd:
Thank you for your reply.
chassis awareness is ENABLED list chassis does show port 23
Any other suggestion?
Kirti
-----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Wednesday, November 24, 2004 11:52 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] RE: Busy signal!!!
There could be a variety of things that cause this. How do you have your chassis awareness setup?
When you're in the arc and do a list chassis command does everything look correct as far as number of ports=23, etc?
Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa@tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc@mailman.xmission.com> Sent: Wednesday, November 24, 2004 11:20 AM Subject: [USR-TC] RE: Busy signal!!!
Hello List:
I finally got 3Com box (1-HiPer NMC, 2-Hiper ARC & 10-Hiper DSP) setup. Today, I connected a T1-PRI ISDN line to test. But as soon as I connect, the line gives busy signal.
What setting causes this. /Please Help/. Thank you in advance.
Kirti
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc