How do you flash the ARC card from the console port? I've only tried it through the ethernet port. Please reply to jdn@adoptable.com Thanks, JD
Return-Path: <owner-usr-tc@lists.xmission.com> Date: Fri, 24 Aug 2001 12:56:28 +0900 From: Jonathan Byrne <byrnej@gol.com> To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Flashing Hyper Arc Mail-Followup-To: usr-tc@lists.xmission.com X-Abuse-Complaints: abuse@gol.com Sender: owner-usr-tc@lists.xmission.com Reply-To: usr-tc@lists.xmission.com
Steve Johnson (linuxnut@sonic.net) wrote:
smoothly untill I hit 80% then I get an TFTP error, Access Violation and it
I see also, but see it a lot less on 128 meg ARCs. If it's nearby, I just go there and flash it over the console port, which works fine.
Cheers,
Jonathan -------- <PLUG TYPE="shameless"> Leaving Japan end of September, available for employment in California. </PLUG>
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
David DenHollander (403)254-1100 Main (403)201-2815 Fax List your equipment for free http://www.adoptable.com/ - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.