Lets first talk about the versions of ARC code. What is the version of ARC code you are using, the answer depends on the arc code. -V ----- Original Message ----- From: "Lewis Bergman" <lbergman@abi.tconline.net> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, July 31, 2002 7:47 AM Subject: Re: [USR-TC] two arcs
On Wednesday 31 July 2002 03:52 am, Charles Sprickman wrote:
Hi,
I've been reading up on how to get two hiper arcs working, and there appear to be numerous ways...
-static config where each arc owns half the cards -dynamic config where the nmc decides who owns what -variations on the above
Which one actually works? I'm most interested in sharing the load, but an automatic failover would be nice too. I saw some old posts in the archives that mention that in some failure modes (where the arc doesn't fully fail but sticks in a reboot loop) the whole chassis basically takes a dive as ownership flip-flops between two arcs. Is that ironed out?
What version of arc code starts to support all this stuff well? I hope you get an answer because I asked the same question a couple of weeks ago. =) -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc