If you're behind a firewall try doing it from infront of the firewall. Todd -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of pankaj Sent: Tuesday, October 01, 2002 4:23 AM To: ved@iyka.com Cc: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] about backup of flash image and dsp's code <ved@iyka.com Saturday, September 28, 2002 6:49 PM wrote >
For all other cards - configuration is very simple you can use TCM and save the cfm file or nvr file that saves the entire configuration of the chassis to your local pc and then use the same to reconfigure in case of certain bad events occur. I tried to do save configuration from TCM,, But its giving option of saving *.whb files. And its talking to long to save, I unable to save it full,, and got failed saving after 5-10 % .
Its ok,,, but can I restore config directly using this text file.
Again how to restore this config,,, or only way is to manual reconfiguration.
Another problem is since from today morning one of my HiperDSP not working,, RN/FL is red, and one of the utilization indicator LED is safrenine, on my TCM card status is ( ?) Unknown.
What do you think happened before this? To start first you would need to reboot the dsp and see if it responds either to nmc or the arc, did you have a hard failure where the dsp lost its brain? I pulled out and push dsp again in the slot,, and got this error message on console of dsp,
!!----------> SDL2 for the PPC403 <------------!! __ Enter Download Trigger __ Flash Image Has Valid CRC, Loading Image.... Diagnostic Power-Up Failure Manufacturing Info -> 1AAA13M0 Mode/Env -> 1/0 Fault Code -> 0-8-19-1 Expected Data -> 00000000 Received Data -> 00004140 Text Message -> Short Address Path Test Failure Info Message -> Second read failed. Hard error indicated. Any cluesss of diagnostics?? Regards pankaj
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of pankaj Sent: Friday, September 27, 2002 7:21 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] about backup of flash image and dsp's code
Hi All, Here we have frequent electricity problem of overvoltage , and UPS is also problematic.
Thats why there may be chances of frequent sudden power off.
Will it affect anyway to TC1000, I want to take backup of Code of Hiper ARC and Hiper DSP and NMC,, How?? , so that incase of anything failure I can restore it .. how?? And what else should I take as backup and how?
Please provide me some guidance.
Thanks Pankaj
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc