I really don't know anything about Erickson switches, and I don't think this would even be possible on a nortel or lucent w/o building a separate trunk group. But you might check to see what they are sending you for digits on long distance calls with a T1 test set. It's possible they are sending you two strings instead of one, the first (for example) containing the II and ANI digits, the second containing the DNIS. If your chassis is only expecting one string, it's going to cut thru the call while the switch is waiting for the chassis to wink back the second string. Eventually the swicth times out waiting for the second wink back. -a On Wed, 21 Mar 2001, Michael Fingerson wrote:
Has anyone heard of this problem: On 5 of our 3com TC Chassis's which are all on Erickson switches and using D4-AMI, we cannot get connected via a long distance call. The local dial-up customers are connecting just fine. Using hyperterminal, we get repeating "U"'s on the screen for about 50 seconds, then the connection drops. If we dial in using a 1010321 (MCI I believe), we get a clean connection for about 110 seconds, then that connection drops. We had a similar problem occur in a different town, but that was on a DMS-10 switch and a telco translator fixed the problem with a switch setting. On the call I make, the disconnect reason is "remote hungup during training (80)". I have talked to our telco (Qwest) and they have checked with translations and everything is set up correctly (or so they say). We had a similar problem with a 3com on a DMS-10 switch and the local telco (Citizens) was able to fix the problem that time. It had to do with a "answer supervision" setting on the switch. Help!
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Aaron Nabil - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.