Installed the 3.5.100 sw on a newer HiperDSP T1 card. Rebooted it. Noticed the T1 didn't look right. I looked at it and it had not restored the original T1 configuration (and possibly other). I changed it back to D4, AMI, robbed bit and rebooted it. This time it came up almost right - but without the AMI setting. Huh? This happened on both DSPs I was upgrading in this remote POP. Just beware of it as I almost forgot the settings for this POP as it's in a pretty small town. PS: We are running 5.3.3 ARC *128M*, 3.5.100 DSP and 8.6.3 NMC without any real issues. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Casen" <Xeen@aros.net> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, July 03, 2002 5:25 PM Subject: RE: [USR-TC] New software
Hi list.
I'm currently running a TCR1000 with 2 PRI DSP's. I'm running some older versions for both my HiperArc and my DSP's and was wondering if you thought it would be beneficial to upgrade to the recommendations made by Justin below.
My current Arc version is 5.0.9. My current DSP version is 2.0.19.
I have a support contract, so getting the upgrades isn't a problem. I just wanted to find out what the general consensus was on whether it would be worth it or not. Thanks for any advice.
Casen
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Justin Kendall Sent: Wednesday, July 03, 2002 3:19 AM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] New software
I've been using 5.3.2 with 3.5.100 for a while and it's finally a pair that I like!!! Unless there are very compelling reasons to use anything else I'll stick with it this way for a bit. By the way...3.5.12, at least for me, had major problems. If you have 3.5.100 now...stay with it. -Justin-
----- Original Message ----- From: "Seth Jacobs" <sjacobs@onramp113.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, July 03, 2002 5:38 PM Subject: Re: [USR-TC] New software
I've been advised not to use HiperDSP 3.5.12, that it has problems with winmodems. I've been advised that 3.5.100 is a better choice.
Seth
----- Original Message ----- From: "Lewis Bergman" <lbergman@abi.tconline.net> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, July 03, 2002 9:24 AM Subject: [USR-TC] New software
Has anyone tried the 5.3.3 HiperARC software or the HiperDSP 3.5.12 that goes with it?
My contract has expired and I am wondering if it is worth the $2600.00 to upgrade it. I currently have 3.5.100 on the DSP's. Any advice welcome. -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc