Will give that a try. THANKS! -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Monday, March 22, 2004 9:51 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] ARC Routing Question Well....you'd have something like this in the radius profile that indicates the ip address they're being assigned: Framed-IP-Address = 192.168.1.17 Then you would have something like this that indicates the route statement: Framed-Route = 192.168.1.16/29 192.168.1.17 1 Framed-IP-Netmask = 255.255.255.255 The first part is their network block, the second part would be their ip address and the 1 is the metric. Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox@foxcomputers.com> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Monday, March 22, 2004 10:39 AM Subject: RE: [USR-TC] ARC Routing Question
Todd - thanks - that sounds like a good possibility - but I'm not very good with RADIUS - any idea what the entry might look like?
- Joel
-----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Monday, March 22, 2004 8:08 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] ARC Routing Question
Can't you add the route statement to the users radius profile as well?
Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox@foxcomputers.com> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc@mailman.xmission.com> Sent: Saturday, March 20, 2004 12:09 PM Subject: [USR-TC] ARC Routing Question
Trying to figure out how to do something, hope someone can help. Have an ISDN user that is assigned a static IP address by RADIUS. I need to route a subnet to his address. I tried to do this using the command:
add ip route 205.159.68.0/27 gateway 38.119.184.24 metric 1
After doing this, a "list ip route" shows this:
205.159.68.0/27 NetMgr 38.119.184.24 1 slot2:/mod:7 (or whatever port they are connected to)
If we reboot the Hiper ARC, the route shows up as this:
205.159.68.0/27 NetMgr 38.119.184.24 1 eth:1
And no longer routes the subnet to the ISDN user.
Any suggestions on what I need to do to make this work and keep working (surviving a reboot)?
Thanks,
Joel
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc