These are the steps I take to enable an "email only" filter. All these steps may not be necessary but it works for me. TFTP the filter files in and then add filter email.in add filter email.out verify email.in verify email.out set interFACE eth:1 filTER_ACCESS on set interface eth:1 input_filter email.in set interface eth:1 output_filter email.out enable ip address_pool_filtering save all Bill Dunn ----- Original Message ----- From: "Kancha ." <kancha2np@yahoo.com> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, March 11, 2003 3:23 AM Subject: [USR-TC] filter through radius Hi: i've created a valid filter in TC1000 and when that filter is applied through RADIUS using Filter-ID everything works fine. The problem is i have another RAS as well and have created few filters in that RAS as well. Now when i apply all those filters through RADIUS TC disconnects user after being authenticated as there is only one filter in TC and i've used radius filter-id to assign multiple filters. help. i need to apply all filters as users could connect through any RAS. __________________________________________________ Do you Yahoo!? Yahoo! Web Hosting - establish your business online http://webhosting.yahoo.com _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc