I have a customer using a Win2K Dell box that has a Connexant HCF modem (software rev. 2.1.2.164.013.023). In a nutshell he can connect and stay connected just fine, however, when he attempts to disconnect it takes about a minute or so to do so. The modem log shows the following information when hanging up the modem: 09-17-2001 14:16:16.89 - Hardware hang-up by lowering DTR. 09-17-2001 14:16:18.09 - WARNING: The modem did not respond to lowering DTR. Trying software hang-up... 09-17-2001 14:16:18.09 - Send: +++ 09-17-2001 14:16:19.09 - Recv: <cr><lf>OK<cr><lf> 09-17-2001 14:16:19.09 - Interpreted response: Ok 09-17-2001 14:16:19.09 - Send: ATH<cr> 09-17-2001 14:16:21.09 - Recv: <no response> 09-17-2001 14:16:21.09 - WARNING: Unrecognized response. Retrying... This is repeated several times before a disconnect occurs. He connects/disconnects to another ISP just fine (not using TC terminal servers). We're using the 3.0.108 code on the Multispan DSP, 5.1.99 on the HyperArc and 8.0.9 on the Hiper NMC. Customer has had Dell replace the modem, reinstall the modem drivers, removed and recreated the DUN entry for us, and tried the basic &F string on the modem. Any suggestions? Walt ----------------------------------------------- Walter N. Gnann ISLC, President wgnann@islc.net http://www.islc.net 843.770.1000 fax: 843.770.1002 ----------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.